Hard floor repair across Toronto & the GTA · Free photo estimates(416) 820-3775
Home › Water Damage Repair

Water Damaged Floor Repair

Cupped, buckled, swollen and black-stained boards from leaks and spills, repaired and blended into your existing floor.

Why repair instead of replace?

  • Moisture checked before repair
  • Stained boards replaced & matched
  • Insurance-ready estimates
  • Hardwood, engineered & laminate

Call (416) 820-3775

Water damaged floor repair

Water is the fastest way to ruin a hard floor. A dishwasher leak, an overflowing tub upstairs, a radiator, a plant pot, a pet accident or a wet entryway can leave boards cupped, buckled or stained. The good news: most water damage is local, and local damage can be repaired.

Signs of water damage

  • Cupping — board edges higher than the centre
  • Crowning — board centres higher than the edges
  • Buckling — boards lifting off the subfloor
  • Dark grey or black stains, especially around sinks, dishwashers, fridges and plants
  • Swollen edges on laminate and engineered planks
  • Soft spots, musty smells, or finish turning white or cloudy

What to do right now

  1. Stop the water at the source and fix the leak.
  2. Remove standing water and wet rugs or furniture.
  3. Run fans and a dehumidifier — don't use high heat.
  4. Take photos for your insurance company.
  5. Call us for an assessment once the floor has started drying.

How we repair it

We measure moisture in the boards and subfloor, wait until they're within a safe range, then decide what can be flattened and refinished and what needs replacing. Replacement boards are matched and woven into the floor, and the area is finished to blend in.

Frequently asked questions

Can water-damaged hardwood be saved?

Mild cupping often flattens again once the floor and subfloor dry out properly, and the surface can then be sanded and refinished. Boards that are black-stained, delaminated, cracked or still deformed after drying are cut out and replaced.

How long should I wait before repairing a water-damaged floor?

Fix the source of the water first, then let the floor dry. Sanding or replacing boards too early can lead to new gaps or crowning later. We check moisture levels before we start the repair.

What causes black stains on hardwood?

Dark grey or black stains usually come from water reacting with tannins in the wood (common in oak), often from pet urine, plant pots or slow leaks. They usually go deeper than the finish, so the most reliable fix is replacing the stained boards.

Do you work with insurance claims?

Yes. We can provide photos, a written description of the damage and an itemized estimate for your adjuster.

Can you repair water-damaged laminate or vinyl?

Swollen laminate can't be dried back to flat, so damaged planks are replaced. Vinyl plank usually survives water itself, but the subfloor under it may need drying, and lifted planks can be relaid or replaced.

Send us a photo. Get a price.

Text a few photos of the damage and the room. We'll tell you whether it can be repaired, how, and roughly what it will cost.

Call nowFree estimate