Hard floor repair across Toronto & the GTA · Free photo estimates(416) 820-3775
Home › Hardwood Floor Repair

Hardwood Floor Repair in Toronto

Damaged boards cut out and replaced with matched hardwood, then sanded, stained and finished to blend into the floor around them.

Why repair instead of replace?

  • Free estimates from photos
  • Matched species, width and stain
  • Board-by-board repair, not a full replacement
  • Serving Toronto and the whole GTA

Call (416) 820-3775

Toronto hardwood floor repair

Solid hardwood is one of the most repairable floors there is. Because each board is a single piece of wood, a damaged board can be cut out and replaced with a matched one, and the surface can be sanded and refinished many times. That means most hardwood damage is a repair, not a replacement.

Hardwood repairs we handle

  • Board replacement — cracked, split, rotted or badly stained boards cut out and replaced
  • Deep scratch and gouge repair — filled, coloured and finished (see scratch repair)
  • Water damage — cupped, crowned and black-stained boards (see water damage repair)
  • Gaps between boards — filled or closed up depending on the cause
  • Loose and squeaky boards — re-secured to the subfloor (see squeaky floors)
  • Patch-ins after renovations — where a wall, vent, island or radiator was removed
  • Stair treads and nosings — cracked, worn or loose

Species and styles

Red and white oak, maple, birch, hickory, walnut, cherry, jatoba (Brazilian cherry) and the narrow strip oak found in many older Toronto homes, in widths from 2¼" up to wide plank. We also repair herringbone and parquet sections, which need individual pieces cut and fitted.

How we match the repair

A good repair depends on matching four things: species, board width and thickness, grain direction, and colour and sheen. We check all four before we start. Stain is mixed and tested on an offcut first, and the final coat is matched for sheen, whether your floor is matte, satin or semi-gloss.

Our process

  1. Send photos or call

    Show us the damaged area, a wider shot of the room, and a close-up of a board edge if you can. Most repairs can be priced from photos.

  2. We confirm the plan

    We identify the flooring type, species, width and finish, and tell you whether it's a spot repair, a board replacement or a section repair.

  3. Matched materials

    We source matching boards or use spare boxes you already have, and mix stain and finish to blend with the existing floor.

  4. Repair and blend

    Damaged boards are cut out and replaced or treated in place, then sanded, coloured and finished so the repair disappears into the floor.

Frequently asked questions

Can you replace a single hardwood board?

Yes. We cut out the damaged board without disturbing its neighbours, remove the old tongue, fit a matched replacement and fasten it in place. The new board is then sanded and finished to match.

What if my flooring is discontinued?

Most solid hardwood can still be matched by species and width even when the original product is gone. We can also borrow boards from a closet or under an appliance and put the new boards there, where nobody will notice.

Do I have to refinish the whole room after a board replacement?

Usually not. We spot-finish the repaired area and blend it. If the existing finish is very worn, a screen-and-recoat of the room can give a more even look, and we'll tell you up front if we think it's worth it.

Can you repair hardwood stairs?

Yes. Cracked treads, worn nosings, loose treads and deep scratches on hardwood stairs are all repairable.

Send us a photo. Get a price.

Text a few photos of the damage and the room. We'll tell you whether it can be repaired, how, and roughly what it will cost.

Call nowFree estimate